Please read thes tips to help you install you jersey at home easy.
Some extra tips –
-If its a brand new jersey, wash it atlas once before applying jersey i.d. this helps with bleeding on the print especially light on dark.
– with name and number placed where i want them, i always start in the middle of the name with the iron pointing up towards neck, slowly moving to the left with a bit of up down motion while applying a good amount of pressure. then back to the right side then back to the middle. then just continue down the number using the smae technique.
– if its a new jersey , DON’T run of the edges onto the print, it will smudge. if you give it a couple of washes before it usually helps or just place a tea towel over the print and you won’t have to worry.
– maybe start with temp at 3/4 if its a new iron, some of the newer ones are quiet powerfull. the one we have here is a few years old now so we just run it full temp
– you can’t go over board on the pressure you put in, just get into it, especially the corners and along the edges.